0Items - $0.00
- No product in the cart.
BASIC CONTROLLERS
BASIC CONTROLLERS
How it Works
“Sentor” is a soil moisture Sensor that detects pre-set moisture level.
“Sencom” solar powers “Sentor” and relays wirelessly to “Procom” to either release or stop water via “Valcom”.
“Valcom” solar powers “Valtor” and communicates with “Procom” accordingly.
"Procom” the main control unit that communicates with all the peripheral devices in the system and sets up prerequisite watering zones.
The “Sentor” checks if the moisture level has reduced below the pre-set value. And if it rains, it will acknowledge and take that into account.
The “Valtor” is switched on and water is provided to your garden or plantation.
The “Sentor” checks if the moisture level has now risen to the required level. And if so, the system stops providing water.
benefits of basic controllers
core advantages
Reduces water wastage.
Enhance yields and increase the value.
Save time with automated watering.
Efficient use of resources and energy.
Basic Controller
Products
PROCOM
The Promcom is the main Control Unit, where all the peripheral devices are manged.
- Its manages devices such as Sencom , Valcom and X-Com in its dedicated private network.
- It displays all information related to each device on its dedicated network.
- It allows the user to setup an Irrigation Zones, by pairing a Sencom and Valcom and then setting a corresponding moisture level for that Zone.
- Powered using its long lasting Li-Poly battery and power charger.
VALTOR
- Powered and integrated into the Valcom unit, whereby should the moisture level decline to the set value then the Valtor will provide adequate water.
- The VALTOR is connected to the main water supply using most hose fittings.
Type : Pilot operated, Straight Connections
Connection Size: Inlet – 3/4″ BSP Outlet : 3/4″ BSP
Op. Pressure : 0.7 to 6 bar
Flow : 30 gal/min
“We empower Smart Watering for gardens and Economical Watering for Farms”
VALTOR 1.5
- The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 1.5 will be instructed to provide adequate water.
- The VALTOR 1.5 is connected to the main water supply using irrigation fittings.
- Connection Size: Inlet: 1.5” Outlet: 1.5” BSP/NPT – Threaded Version
- Pressure Rate: 0.4 to 10 bar
- Flow Rate: 1000 Litres/min
VALTOR 2
- The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 2 will be controlled to provide adequate water.
- The VALTOR 2 is connected to the main water supply using irrigation fittings.
- Connection Size:
Inlet: 2” Outlet: 2” BSP/NPT- Threaded Version
Inlet: 2” Outlet: 2” ISO/ASTM – Solvent Version - Pressure Rate: 0.4 to 10 bar
- Flow Rate: 1000 Litres/min
- ction port.
- Variable cable lengths available.
VALTOR 3
- The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 3 will be controlled to provide adequate water.
- The VALTOR 3 is connected to the main water supply using irrigation fittings.
- Connection Size:
Inlet: 3” Outlet: 3” BSP/NPT – Threaded Version
Inlet: 3” Outlet: 3” ISO/ASTM – Solvent Version - Pressure Rate: 0.4 to 10 bar – Flow Rate: 1300 Litres/min
VALTOR 4
- The valve is powered and controlled by the Valcom, whenever the moisture level recedes, the Valtor 4 will be controlled to provide adequate water.
- The VALTOR 4 is connected to the main water supply using irrigation fittings.
- Connection Size: Inlet: 4” Outlet: 4” BSP/NPT – Threaded Version
Inlet: 4” Outlet: 4” ISO/ASTM – Solvent Version - Pressure Rate: 0.4 to 10 bar
- Flow Rate: 4100 Litres/min
